Martin Made in Germany
T66
Sliding table saw T66
The T66 is MARTIN's compact all-rounder, meant to give a smaller workshop the main features of the larger saws in less floor space. Its SynchroDrive synchronous motor gives stepless blade speed from 1,000 to 5,000 rpm, the blade tilts to the right up to 46 degrees, and the sliding table runs on MARTIN's oil-lubricated hardened steel guides with no plastic parts. It is set from a 7 in touchscreen and works with MARTIN's ConnectControl system, which adds iPad control and cloud-stored data.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all panel saws or every Martin machine we supply.
Specifications
- Blade tilt
- Right-tilting, up to +46 degrees
- Blade speed
- 1,000-5,000 rpm, stepless (SynchroDrive)
- Motor
- 4.0 or 5.5 kW standard depending on model; up to 11 kW available
- Edging table length
- 1,900 / 3,000 / 3,300 / 3,700 mm
- Format cut
- 1,900 x 1,900 / 3,000 x 3,000 / 3,300 x 3,300 / 3,310 x 3,700 mm
- Cutting width
- 850 mm (1,350 mm)
- Sliding table guide
- Hardened steel guides, continuously oil-lubricated
- Rip fence
- Manual folding rip fence on four deep-groove ball bearings, scale with fine adjustment
- Control
- 7 in touchscreen; ConnectControl with iPad and cloud storage
- Mitre options
- Mitre cross-cut table (+/-46 degrees), MitreX double mitre fence
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The T66 suits a smaller workshop that wants many of the features of a larger sliding table saw, such as stepless blade speed and a 46 degree tilt, in a more compact frame. Edging table lengths from 1,900 to 3,700 mm and format cuts up to 3,310 x 3,700 mm cover general cabinet and furniture panel work without the footprint of a full production saw. Oil-lubricated hardened steel guides with no plastic parts matter for a shop running the saw daily over many years. A shop cutting oversized panels regularly, beyond about 3.3 x 3.7 m, would need the larger format of the Altendorf F 45 instead.
Confirm before you order
- Confirm motor power needed (4.0, 5.5 kW or up to 11 kW options) for the panel thickness typically cut
- Check whether the ConnectControl iPad and cloud feature is standard or optional on the unit quoted
- Verify cutting width needed (850 mm standard or 1,350 mm wide version)
Other panel saws
-
Altendorf
F 45
Sliding table saw with motorised rise/fall and 0-46 degree tilt, a 3,000 mm sliding table as standard and cutting lengths up to 5,000 mm.
- Max. cutting length
- 5,000 mm
- Max. cutting height
- 204 mm
- Max. cutting width
- 1,600 mm
-
HOMAG
SAWTEQ S-100
HOMAG's smallest horizontal panel dividing saw, with 65 mm blade projection and cutting lengths of 3,200, 3,800 or 4,300 mm.
- Saw blade projection
- 65 mm
- Cutting length
- 3,200 / 3,800 / 4,300 mm
- Program fence speed
- Up to 60 m/min
-
SCM
gabbiani s
Automatic single-blade beam saw for single panels or stacks, in 3,200, 3,800 and 4,500 mm cutting lengths with 95 or 115 mm blade projection.
- Versions
- gabbiani s 95 and gabbiani s 115
- Cutting length
- 3,200 / 3,800 / 4,500 mm
- Blade projection
- 95 mm (s 95) or 115 mm (s 115)