Altendorf Made in Germany

F 45

Name: Altendorf F 45
Brand: Altendorf

Altendorf F 45

The F 45 is Altendorf's flagship sliding table saw, used on panels, solid wood, plastics and aluminium. The base machine has motorised blade height and 0-46 degree tilt with automatic height correction, a 5.5 kW three-speed motor and a 3,000 mm sliding table, and it can be configured with a CNC rip fence and a patented CNC crosscut fence. Three control units are offered, from the swivelling ProDrive to the ElmoDrive with a 12 in touchscreen, and Altendorf's HAND GUARD optical safety system can stop the blade in a dangerous situation.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all panel saws or every Altendorf machine we supply.

Specifications

Max. cutting length: 5,000 mm
Max. cutting height: 204 mm
Max. cutting width: 1,600 mm
Blade (basic configuration): Max. diameter 450 mm, max. projection 154 mm
Rise/fall and tilt: Motorised, 0-46 degrees, automatic cutting-height correction when tilted
Motor (basic configuration): 5.5 kW (7.5 HP), 3,000/4,000/5,000 rpm, manual speed selection
Sliding table (basic configuration): 3,000 mm
Rip fence: Manual with fine adjustment, 1,000 mm cutting width (basic); CNC rip fence 250 mm/s, accuracy 0.1 mm
Machine weight: From 1,170 kg, depending on configuration
Working height: 910 mm (880 mm or 850 mm available)

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The F 45 suits a shop cutting panels, solid wood, plastics or aluminum that wants a flagship sliding table saw with room to grow into CNC fences later, since the base machine already includes motorised rise and fall with automatic height correction on tilt cuts. The base configuration covers a 3,000 mm sliding table and 1,000 mm rip width, while options extend cutting length to 5,000 mm and width to 1,600 mm for larger sheet work. A shop cutting only standard 4 by 8 ft sheets with no plan for oversized panels would get the same practical capacity from a smaller model such as the MARTIN T66 at lower cost.

Confirm before you order

Confirm which configuration (base or optioned) the quoted 5,000 mm length and 1,600 mm width refer to
Check whether the CNC rip fence and crosscut fence are included or add-on options
Verify working height (910, 880 or 850 mm) matches operator preference before ordering