HOMAG Made in Germany
SAWTEQ S-100
Panel dividing saw SAWTEQ S-100
The SAWTEQ S-100, formerly the SAWTEQ B-130 and HPP 130, is HOMAG's entry beam saw for joinery shops cutting single panels and small batches. It has a program fence and saw carriage that each run up to 60 m/min, a pressure beam, a central side-pressure device built into the saw carriage, 500 mm air-cushion tables and full safety guarding. It runs CADmatic 5 on a 24 in multi-touch screen, with options such as Power Concept Classic, intelliGuide Classic LED guidance and module45 for bevel cuts up to 46 degrees.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all panel saws or every HOMAG machine we supply.
Specifications
- Saw blade projection
- 65 mm
- Cutting length
- 3,200 / 3,800 / 4,300 mm
- Program fence speed
- Up to 60 m/min
- Saw carriage speed
- Up to 60 m/min
- Main saw motor
- 5.5 kW (7.5 or 9.2 kW optional)
- Scoring saw
- Electric adjustment via CADmatic
- Air cushion tables
- 500 mm wide
- Control
- CADmatic 5, 24 in full-HD multi-touch display
- Options
- Power Concept Classic, intelliGuide Classic, module45 (0-46 degree bevel), Easy2Feed lift table (3,800 mm and longer), Classic label printer, stress-elimination cut
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The SAWTEQ S-100 suits a joinery shop stepping up from a well-equipped circular saw to a horizontal beam saw for single panels and small batches, since HOMAG positions it as only slightly more expensive than that step. Cutting lengths of 3,200, 3,800 or 4,300 mm let a shop match the saw to typical panel sizes without paying for a longer beam than needed, and program fence and carriage speeds up to 60 m/min keep single-panel cutting efficient. A shop running large batch production with automated panel storage and stacking would be better matched to a larger beam saw such as the SCM gabbiani s.
Confirm before you order
- Confirm blade motor power needed (5.5 kW standard, or 7.5 or 9.2 kW optional) for the panel materials in use
- Check which cutting length (3,200, 3,800 or 4,300 mm) covers the shop's largest typical panel
- Verify weight and scoring motor power directly with HOMAG, since the page does not publish them
Other panel saws
-
Altendorf
F 45
Sliding table saw with motorised rise/fall and 0-46 degree tilt, a 3,000 mm sliding table as standard and cutting lengths up to 5,000 mm.
- Max. cutting length
- 5,000 mm
- Max. cutting height
- 204 mm
- Max. cutting width
- 1,600 mm
-
Martin
T66
Compact sliding table saw with stepless SynchroDrive blade speed, right-tilting blade to 46 degrees and format cuts up to 3,310 x 3,700 mm.
- Blade tilt
- Right-tilting, up to +46 degrees
- Blade speed
- 1,000-5,000 rpm, stepless (SynchroDrive)
- Motor
- 4.0 or 5.5 kW standard depending on model; up to 11 kW available
-
SCM
gabbiani s
Automatic single-blade beam saw for single panels or stacks, in 3,200, 3,800 and 4,500 mm cutting lengths with 95 or 115 mm blade projection.
- Versions
- gabbiani s 95 and gabbiani s 115
- Cutting length
- 3,200 / 3,800 / 4,500 mm
- Blade projection
- 95 mm (s 95) or 115 mm (s 115)