TitanGroup Equipment Contact us
DenaliWeld Water-Cooled Laser Welding Machine 1500/2000/3000 W

DenaliWeld Made in USA

Water-Cooled Laser Welding Machine 1500/2000/3000 W

Water Cooled Laser Welding Machine

DenaliWeld's water-cooled welder uses the company's own fiber source, controls and modular chiller, and runs welding and cleaning from one 3-in-1 handheld head. An automatic single or double-motor wire feeder takes wire from 0.8 to 2.0 mm, and a welding log stores time, power and speed for quality records. DenaliWeld states the chiller keeps the machine running for up to four hours without overheating.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all laser welders or every DenaliWeld machine we supply.

Specifications

Laser power
1500 W, 2000 W or 3000 W
Wavelength
1060 to 1100 nm
Operating mode
Continuous / modulated; spot or line oscillation
Fiber length
Approx. 10 m (32.8 ft)
Supply
AC 208 V (1.5 and 2 kW), AC 480 V (3 kW), 50/60 Hz
Power consumption
7 / 9 / 11 kW
Welding speed
0 to 95 cm/min (1.5 kW); 0 to 105 cm/min (2 and 3 kW)
Wire diameter, automatic feed
0.8 to 2.0 mm
Machine weight
Approx. 80 / 85 / 90 kg
Handheld head weight
Approx. 900 g

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

This water-cooled handheld welder suits a metal shop running longer welding sessions where an air-cooled gun would need to pause and cool, since DenaliWeld states the chiller keeps it running for hours. The 3-in-1 head covering welding and cleaning, plus a wire feeder for 0.8 to 2.0 mm wire, lets one operator handle joint prep and finishing without switching tools. Power steps from 1.5 to 3 kW let a shop match the machine to its typical material thickness. A shop that only runs short, occasional welds would get similar results from a lighter air-cooled unit like the IPG LightWELD or xTool MetalFab without the water-cooling hardware.

Confirm before you order

  • Confirm 480 V supply is available for the 3 kW version, since lower power steps run on 208 V
  • Check wire diameter range (0.8 to 2.0 mm) matches typical filler wire used in the shop
  • Verify component country of origin with DenaliWeld beyond the general Assembled in the USA mark

Before you buy

Other laser welders