TitanGroup Equipment Contact us
WM Thermoforming FT 700

WM Thermoforming Made in Switzerland

FT 700

FT 700 Punch & Die Tilting Thermoforming Machine

The FT 700 forms and trims the parts in the mould, then tilts the lower platen to pass them to the stacker, which suits cups and tubs that need tight cut tolerances. It is rated for up to 45 cycles per minute on sheet up to 750 mm wide, with an HTS energy-saving heater, high-speed plug motion and clamping force monitoring. WM offers four stackers for it, from a downward multi-stacker for lids to roto and blow stackers for deep cups.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all thermoforming or every WM Thermoforming machine we supply.

Specifications

Max. sheet width
750 mm
Max. mould size
705 x 400 mm
Max. cutting dimension
685 x 340 mm
Max. negative depth
150 mm (180 mm in brackets on the maker's table)
Clamping force
400 kN
Max. sheet thickness
1.8 mm (2.6 mm in brackets on the maker's table)
Max. cycles/min
45
Cutting system
Punch and die, in-mould trim, tilting lower platen
Stacking options
MSv multi stacker, MSvS multi stacker shuttle, RS roto stacker, BS blow stacker

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The FT 700 suits a converter making cups, tubs and other deep-drawn containers needing tight cut tolerances, since forming and trimming happen in the mould before the tilting lower platen passes parts to the stacker. Sheet width up to 750 mm and up to 45 cycles per minute put it in the middle of WM's FT range, between the smaller FT 500 and the larger FT 900. Four stacker options, from a downward multi-stacker for flat lids to roto and blow stackers for deep cups, let a buyer match the machine to the product shape rather than one fixed stacker for every part.

Confirm before you order

  • Confirm the bracketed depth (150 or 180 mm) and thickness (1.8 or 2.6 mm) figures with WM, since the source table leaves them unexplained
  • Check which stacker option (MSv, MSvS, RS or BS) fits the product shape planned
  • Verify materials, power and footprint directly with WM, since none are published for the FT series

Before you buy

Other thermoforming