GtmSmart Made in China
HEY11
GtmSmart Fully Automatic PP PLA Water Glass Jelly Cup Plastic Thermoforming Machine HEY11
A compact cup line with forming, cutting and stacking stations, driven by a hydraulic and pneumatic pressure system. It comes in two forming sizes, 680 x 350 mm and 780 x 420 mm, runs up to 25 cycles per minute and takes sheet from 0.3 to 2.0 mm thick. It suits converters starting out in disposable drink cups, jelly cups and bowls who do not need a European high-speed line.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all thermoforming or every GtmSmart machine we supply.
Specifications
- Max. forming area
- 680 x 350 mm or 780 x 420 mm (two sizes)
- Max. forming depth
- 180 mm
- Sheet width
- 350-810 mm
- Sheet thickness
- 0.3-2.0 mm
- Max. mould closing force
- 50 t
- Speed
- Max. 25 cycles/min
- Materials
- PS, PET, HIPS, PP, PLA, etc.
- Power
- 165 kW total (135 kW heating); 380 V, 50 Hz, 3-phase 4-wire
- Machine dimensions
- 5290 x 2100 x 3480 mm
- Machine weight
- 9.5 t
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The HEY11 suits a converter starting out in disposable drink cups, jelly cups or bowls who does not need the speed or cost of a European high-speed line, with two forming sizes and up to 25 cycles per minute covering PP, PET, PS and PLA cup production at entry to mid-range volume. Because it runs on 380 V 50 Hz power, a Canadian plant on 600 V 60 Hz service needs a quoted electrical package to match, which should be priced in before comparing cost against other lines in this catalog. A converter needing higher-speed output should compare the ILLIG IC-RDM 75Kc or Kiefel KMD 78.2 Speed instead.
Confirm before you order
- Confirm which forming size (680 x 350 mm or 780 x 420 mm) and its associated model code applies to the unit quoted
- Price a 380 V 50 Hz to 600 V 60 Hz electrical package for a Canadian installation
- Verify sheet thickness range (0.3 to 2.0 mm) matches the resin and cup wall planned
Other thermoforming
-
GN Thermoforming Equipment (BMG)
GN3021DX
Servo-driven contact-heat, cut-in-place roll-fed thermoformer for APET and other food-packaging sheet.
- Forming area
- 760 x 530 mm (30 x 21 in) max
- Depth of draw
- 125 mm (5 in) max
- Material thickness
- 0.15-1.00 mm (0.006-0.040 in)
-
GN Thermoforming Equipment (BMG)
GN800
Servo-driven form-cut-stack thermoformer for high-volume containers, lids and trays in PET, CPET, PP, PS and PLA.
- Max. forming area
- 830 x 570 mm (32.6 x 22.4 in)
- Depth of draw
- 150 mm (5.9 in) above and below sheet line
- Clamping / cutting force
- 75 metric tonnes each (form and cut station)
-
ILLIG
IC-RDM 75Kc
Roll-fed cup thermoformer that forms and punches in one station, rated at up to 42 cycles per minute.
- Forming area
- 735 x 465 mm
- Max formed part height
- 150 mm (185 mm optional)
- Max material width
- 850 mm