ILLIG Made in Germany

IC-RDM 75Kc

Name: ILLIG IC-RDM 75Kc
Brand: ILLIG

IC-RDM 75Kc Automatic roll-fed machine for forming/punching operation

A roll-fed pressure former from ILLIG's cup-machine line, used for high-volume cups, pots and deep tubs. Forming and punching happen in the same station with combined tooling, and a cam-driven toggle press provides high forming and punching force. After each cycle the forming table tilts 80° so parts drop into the stacker. It can take film from a roll or inline from an extruder, and it suits parts with a deep draw.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all thermoforming or every ILLIG machine we supply.

Specifications

Forming area: 735 x 465 mm
Max formed part height: 150 mm (185 mm optional)
Max material width: 850 mm
Max tool closing force: 600 kN
Max cycle speed: 42 cycles/min
Material feed: From roll or inline from a connected extruder
Tooling: Combined in-place forming and pass-through punching

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The IC-RDM 75Kc suits a converter running high-volume cups, pots or deep tubs needing a deep draw, since the cam-driven toggle press delivers high forming and punching force in one station rather than splitting the two operations. A 735 x 465 mm forming area and up to 42 cycles per minute put it above entry-level cup formers in output, and taking film from a roll or inline from an extruder gives flexibility on resin sourcing. Because ILLIG does not publish material, power or footprint figures on the public page, a buyer should request the full data sheet before comparing this model against the GtmSmart HEY11 or Kiefel KMD 78.2 Speed.

Confirm before you order

Request ILLIG's full technical data sheet for materials, power, air and footprint, since the public page omits them
Confirm maximum formed part height needed (150 mm standard or 185 mm optional)
Verify Canadian service coverage and lead time directly with ILLIG