Trumpf Made in Germany
TruLaser 1030 fiber
TruLaser 1030 fiber
The TruLaser 1030 fiber is the 3000 x 1500 mm member of Trumpf's Series 1000, aimed at shops starting out in laser cutting or adding a second machine. The cutting area sits inside an enclosed protective housing, and the Touchpoint control comes loaded with Trumpf's tested cutting data for common materials and thicknesses. CoolLine water-mist cooling, nanojoints, Drop&Cut remnant nesting and a heavy-duty pallet changer are available.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all fiber lasers or every Trumpf machine we supply.
Specifications
- Working range (X x Y)
- 3000 x 1500 mm
- Laser power (TruFiber)
- 4000, 6000, 9000 or 12000 W
- Max. simultaneous speed
- 140 m/min
- Max. mild steel thickness (12 kW)
- 30 mm; 40 mm with thick-sheet package
- Max. stainless steel thickness (12 kW)
- 40 mm; 50 mm with thick-sheet package
- Max. aluminum thickness (12 kW)
- 30 mm
- Max. workpiece weight
- 900 kg; 1800 kg with heavy-duty pallet changer
- Machine dimensions (L x W x H)
- 9333 x 5990 x 2200 mm
- Basic machine weight
- 9400 kg
- Average power input in production
- 10 kW (4 kW laser) to 16 kW (12 kW laser)
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The TruLaser 1030 fiber suits a shop starting out in laser cutting or adding a second machine, since Trumpf loads the Touchpoint control with tested cutting parameters so an operator does not have to develop programs from scratch. At 3 x 1.5 m with power from 4 to 12 kW it covers mild steel up to 30 to 40 mm and stainless up to 40 to 50 mm at top power, enough for most general fabrication without a larger-format machine. A shop already running high volumes should compare the higher-power ByStar Fiber 6225 or a machine with a larger bed instead.
Confirm before you order
- Confirm which thick-sheet package options are needed to reach the maximum mild steel and stainless capacities
- Check maximum workpiece weight (900 kg standard, 1,800 kg with heavy-duty pallet changer) against typical sheet sizes
- Verify machine weight of about 9,400 kg for rigging and floor load planning
Other fiber lasers
-
Amada
ENSIS-3015RIe
3 x 1.5 m fiber laser with a built-in Rotary Index that also cuts round, square and rectangular tube, channel and angle.
- Laser power
- 3000, 6000 or 9000 W (max. 3 kW in Rotary Index mode)
- Working range (X x Y x Z)
- 3070 x 1550 x 200 mm
- Repeatable positioning accuracy
- ±0.01 mm
-
Bystronic
ByStar Fiber 6225
Large-format 6.2 x 2.5 m enclosed fiber laser from Bystronic with laser sources up to 30 kW.
- Nominal sheet size
- 6200 x 2500 mm
- Laser power
- Up to 30 kW
- Max. simultaneous positioning speed
- 170 m/min
-
Gweike
LF1390
Fully enclosed 1300 x 900 mm fiber laser for small, precise parts in thin sheet, offered from 500 W to 3 kW.
- Working area
- 1300 x 900 mm
- Laser power
- 500 W, 800 W, 1000 W, 2000 W or 3000 W
- Repeat positioning accuracy
- ±0.02 mm