Amada Made in Japan
ENSIS-3015RIe
ENSIS-RIe Sheet and Tube Processing Centre
The ENSIS-3015RIe pairs Amada's variable-beam ENSIS fiber source with a Rotary Index unit, so one machine handles flat sheet and profiles up to 220 mm in diameter. Both chucks are driven, which stops square and rectangular tube from twisting, and Amada quotes a sheet-to-tube changeover of about five minutes. A shuttle table, a 16-station nozzle changer and wide side doors are part of the standard machine.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all fiber lasers or every Amada machine we supply.
Specifications
- Laser power
- 3000, 6000 or 9000 W (max. 3 kW in Rotary Index mode)
- Working range (X x Y x Z)
- 3070 x 1550 x 200 mm
- Repeatable positioning accuracy
- ±0.01 mm
- Table loading weight
- 920 kg
- Round tube diameter
- 19 to 220 mm
- Square tube
- 19 to 150 mm
- Channel / angle profile
- 19 to 150 mm / 19 to 130 mm
- Max. tube weight / length
- 200 kg / 6000 mm
- Tube wall thickness
- 1 to 12 mm (angle and channel 1 to 9 mm)
- Dimensions with shuttle table (L x W x H)
- 12505 x 2915 x 2532 mm
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The ENSIS-3015RIe suits a fabricator that cuts both flat sheet and round, square or rectangular tube on one machine, since the built-in Rotary Index switches between the two with a changeover of about five minutes rather than needing a separate tube laser. Tube capacity up to 220 mm diameter and sheet up to 25 mm mild steel at all three power levels (3, 6 or 9 kW) covers structural steel fabrication, railing and frame work alongside flat parts. A shop that only ever cuts flat sheet has no use for the Rotary Index and would get better value from a dedicated flat-bed laser such as the Trumpf TruLaser 1030.
Confirm before you order
- Confirm laser power needed, noting Rotary Index mode caps at 3 kW even on the 6 or 9 kW machine
- Check tube wall thickness range (1 to 12 mm, less for angle and channel) against typical stock
- Verify table loading weight of 920 kg covers the heaviest sheets planned
Other fiber lasers
-
Bystronic
ByStar Fiber 6225
Large-format 6.2 x 2.5 m enclosed fiber laser from Bystronic with laser sources up to 30 kW.
- Nominal sheet size
- 6200 x 2500 mm
- Laser power
- Up to 30 kW
- Max. simultaneous positioning speed
- 170 m/min
-
Gweike
LF1390
Fully enclosed 1300 x 900 mm fiber laser for small, precise parts in thin sheet, offered from 500 W to 3 kW.
- Working area
- 1300 x 900 mm
- Laser power
- 500 W, 800 W, 1000 W, 2000 W or 3000 W
- Repeat positioning accuracy
- ±0.02 mm
-
Gweike
LF3015GA
Fully covered 3 x 1.5 m fiber laser with a two-position exchange table, 1.5 to 12 kW.
- Working area
- 3050 x 1530 mm
- Laser power options
- 1.5, 2, 3, 4, 6 or 12 kW
- X/Y positioning accuracy
- ±0.03 mm