Gweike Made in China
LF3015GA
GA Series High-performance Fiber Laser Cutting Machine
The LF3015GA encloses the whole cutting area in a protective housing and uses a two-level exchange table, so one sheet is loaded while the other is cut. Gweike rates the table swap at 15 seconds. Larger 4 x 2 m (LF4020GA) and 6 x 2.5 m (LF6025GA) versions share the same motion specs.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all fiber lasers or every Gweike machine we supply.
Specifications
- Working area
- 3050 x 1530 mm
- Laser power options
- 1.5, 2, 3, 4, 6 or 12 kW
- X/Y positioning accuracy
- ±0.03 mm
- X/Y repeat positioning accuracy
- ±0.02 mm
- Max. speed
- 120 m/min
- Max. acceleration
- 1.5 G
- Exchange table
- Dual-position, 15 s exchange
- Overall dimensions
- 8580 x 2850 x 2300 mm
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The LF3015GA suits a shop that wants the laser cutting continuously, since the dual-position exchange table lets an operator load the next sheet while the current one is cut, with a rated swap of about 15 seconds. The fully enclosed housing adds a safety and fume layer over an open-bed machine, useful where the laser sits close to other work areas. Power from 1.5 to 12 kW at the same 3 x 1.5 m size as the LF3015LN II lets a buyer choose based on throughput rather than table size. A small shop running occasional jobs may not need that throughput and could save with the simpler LF3015LN II.
Confirm before you order
- Confirm laser power needed for target material thickness, since no cutting chart is published
- Check floor space for the 8,580 x 2,850 mm overall footprint
- Verify exchange table cycle time of 15 seconds matches expected changeover workflow
Other fiber lasers
-
Amada
ENSIS-3015RIe
3 x 1.5 m fiber laser with a built-in Rotary Index that also cuts round, square and rectangular tube, channel and angle.
- Laser power
- 3000, 6000 or 9000 W (max. 3 kW in Rotary Index mode)
- Working range (X x Y x Z)
- 3070 x 1550 x 200 mm
- Repeatable positioning accuracy
- ±0.01 mm
-
Bystronic
ByStar Fiber 6225
Large-format 6.2 x 2.5 m enclosed fiber laser from Bystronic with laser sources up to 30 kW.
- Nominal sheet size
- 6200 x 2500 mm
- Laser power
- Up to 30 kW
- Max. simultaneous positioning speed
- 170 m/min
-
Gweike
LF1390
Fully enclosed 1300 x 900 mm fiber laser for small, precise parts in thin sheet, offered from 500 W to 3 kW.
- Working area
- 1300 x 900 mm
- Laser power
- 500 W, 800 W, 1000 W, 2000 W or 3000 W
- Repeat positioning accuracy
- ±0.02 mm