Messer Made in USA

MetalMaster Xcel

Name: Messer MetalMaster Xcel
Brand: Messer

MetalMaster Xcel

The MetalMaster Xcel is Messer's unitized high-speed cutting machine, carrying up to two 400 A precision plasma torches plus optional fiber laser, oxy-fuel, bevel heads, drilling and marking. It positions at up to 3000 ipm with 0.5 g acceleration and is laser-verified to +/- 0.002 in over an 80 in area. A self-cleaning Slagger table moves slag and small parts out automatically, and the Global ControlPlus has a 24 in touch screen with nesting built in.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all plasma tables or every Messer machine we supply.

Specifications

Cutting width: 6, 8 or 10 ft
Cutting length: 10 to 55 ft in 5 ft increments
Material thickness: 26 ga to 3 in, depending on process
Plasma: Up to two precision plasma torches, 400 A each
Fiber laser option: Up to 2 in cutting thickness
Positioning speed / acceleration: Up to 3000 ipm / up to 0.5 g
Motion accuracy: +/- 0.002 in in an 80 in area (laser interferometer)
Drives: 8.4 HP and 4.7 HP AC servo, helical rack and pinion, planetary reducers
Control: Global ControlPlus, 24 in touch screen
Table: Slagger self-cleaning zoned, ducted dry exhaust table

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The MetalMaster Xcel suits a high-speed production plate shop wanting plasma, optional fiber laser, oxy-fuel, bevel, drilling and marking on one unitized machine, where twin 400 A plasma torches and speeds up to 3000 ipm target volume well beyond a standard job shop table. Widths of 6, 8 or 10 ft and lengths from 10 to 55 ft in 5 ft steps let a shop size the table to its plate stock, and the self-cleaning Slagger table cuts down manual cleanout between jobs. A smaller shop not running multiple shifts would find this scale beyond what a single 4 by 8 ft table like the Torchmate 4800 already covers.

Confirm before you order

Confirm laser power figure directly with Messer, since the web page and brochure disagree (2 to 15 kW versus up to 20 kW)
Check which bevel unit (Deltae or Bevel-R) suits the plate thickness and bevel angles needed
Verify UL/cUL compliance documentation for the specific configuration ordered