Accurl Made in China
CPL-1530 (Hypertherm XPR300)
Hypertherm XPR300 CNC Plasma Cutting Machine for Plasma Cutter Table & Oxy-fuel Cutting Stainless steel
Accurl builds this gantry table with a downdraft bed whose extraction zones are switched by the CNC. It is fitted with a Hypertherm XPR300 plasma source, EDGE Pro CNC and ArcGlide torch height control. The XPR300 is rated for dross-free cuts in mild steel up to 50 mm, and the CPL-1530 is the 1500 x 3000 mm size of a range that goes up to 2500 x 6000 mm.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all plasma tables or every Accurl machine we supply.
Specifications
- Cutting area
- 1500 x 3000 mm
- Overall dimensions (W x L x H)
- 2550 x 4550 x 2250 mm
- Plasma source
- Hypertherm XPR300
- Mild steel
- 50 mm dross-free / 45 mm production pierce / 80 mm max.
- Stainless steel
- 38 mm production pierce / 75 mm max.
- Aluminium
- 38 mm production pierce / 50 mm max.
- CNC
- Hypertherm EDGE Pro
- Height control
- ArcGlide THC
- Drive
- Dual-side AC servo Y with planetary gearbox, helical rack and pinion
- Table
- Integrated downdraft, CNC multi-zone
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The CPL-1530 suits a fabrication shop wanting dross-free plasma cutting on mild steel up to 50 mm, backed by Hypertherm's own XPR300 source, EDGE Pro control and ArcGlide torch height control rather than a house-brand plasma system. The 1500 x 3000 mm bed and CNC-switched downdraft extraction zones suit a shop cutting structural steel parts, brackets and plate at production volume rather than occasional jobs. A shop cutting thicker plate regularly should look at Accurl's larger table and source combinations in the same range, since the XPR300 tops out at 80 mm on this size.
Confirm before you order
- Confirm traverse speed, positioning accuracy and machine weight directly with Accurl, since none are published
- Check gas supply (oxygen, nitrogen, compressed air) needed to run the XPR300 at rated capacity
- Verify production pierce thickness (45 mm mild steel) matches the plate range the shop actually runs, rather than the 80 mm maximum
Other plasma tables
-
Kinetic
K2500
Production plasma and oxy-fuel plate cutting system with bevel heads and a built-in drilling turret, up to 18 ft x 100 ft.
- Plasma cutting
- Up to 4 in thick
- Oxy-fuel cutting
- Up to 8 in thick
- Plasma sources
- Hypertherm XPR170, XPR300, XPR460, HPR400XD or HPR800XD
-
Lincoln Electric
Torchmate 4800
Fully assembled 4 x 8 ft CNC plasma table with water table and FlexCut air plasma, sized for growing fab shops.
- Cutting area
- 4 x 8 ft
- Table dimensions
- 74 x 114 x 63 in (1880 x 2896 x 1600 mm)
- Machine weight
- 1,847 lb (838 kg)
-
Messer
MetalMaster Xcel
Industrial high-speed plate cutting machine with twin 400 A plasma, optional fiber laser, 6 to 10 ft wide and up to 55 ft long.
- Cutting width
- 6, 8 or 10 ft
- Cutting length
- 10 to 55 ft in 5 ft increments
- Material thickness
- 26 ga to 3 in, depending on process