Felder Made in Austria
G 383
G 383
The G 383 is the top model of Felder's G 300 series, meant for small and mid-sized shops that want finished edges straight off the machine. It comes with a chain feed, a premilling unit with two counter-rotating diamond cutters, a Teflon-coated glue pot and a corner rounding unit, plus room for up to three more finishing units such as a radius scraper, surface scraper or buffing unit. Units, glue temperature and machine status are set on a 7 in touchscreen, and a single-phase 230 V version is available.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all edge banders or every Felder machine we supply.
Specifications
- Edge thickness
- 0.4-5 mm (G 383 listing: 1/64 in to 3/16 in)
- Workpiece height
- 10-50 mm (3/8 in to 2 in)
- Installation length
- 11 ft 9 3/4 in
- Premilling
- Standard; two counter-rotating, activation-controlled premillers with diamond-tipped spiral cutters
- Corner rounding
- Standard; edges 0.4-3 mm, 50 mm processing height, at 7 m/min feed
- Coiled edge feed
- Coiled material 0.4-3 mm; solid wood strips up to 5 mm in single feed
- Glue pot
- Teflon-coated, 1.2 kg capacity, 12 min heat-up
- End trimming
- Two conical saw blades at 9,000 rpm on linear guides
- Control
- 7 in touchscreen, Quick-Set system
- Power supply
- Available in 1 phase, 230 V
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The G 383 suits a small or mid-sized cabinet or joinery shop that wants premilling and rounded corners without stepping up to a full industrial line, since both come standard. Workpiece thickness from 10 to 50 mm and edges up to 5 mm cover typical cabinet door and panel work, and the single-phase 230 V option matters for a shop without heavy three-phase service. Room for up to three more finishing units, such as a radius scraper, surface scraper or buffing unit, lets a shop add capability later. A high-output shop banding hundreds of panels a shift would outgrow its speed and should look at the HOMAG EDGETEQ S-300.
Confirm before you order
- Confirm current feed speed with Felder, since no separate machine feed rate is published beyond the corner rounding figure
- Check whether the single-phase 230 V version fits existing shop power or three-phase is preferred
- Verify workpiece height range (10 to 50 mm) covers the shop's thickest panels
Other edge banders
-
Holz-her
STREAMER 1054 C
Compact 3.96 m edgebander with premilling, PUR-capable glue system and a multi-function trimming unit, for workpieces up to 60 mm and edges up to 8 mm.
- Machine length
- 3,960 mm
- Workpiece thickness
- Up to 60 mm (8-45 mm standard, 60 mm with optional package)
- Edge thickness
- Up to 8 mm (0.4-3 mm standard; 6 mm or 8 mm with optional packages)
-
HOMAG
EDGETEQ S-300
High-output single-sided edge banding machine, 8 to 14 m/min, with joint trimming, profile trimming for corner rounding and automatic multi-profile changeover.
- Feed speed
- 8-14 m/min
- Workpiece thickness
- 8-60 mm
- Min. workpiece width
- 70 mm (for workpieces 8-22 mm thick)
-
SCM
olimpic 500
Single-sided automatic edgebander for small and medium firms, running at 12 m/min with edges from 0.3 to 6 mm and optional premilling and 2-motor corner rounding.
- Feed speed
- 12 m/min
- Edge thickness
- 0.3-6 mm
- Panel thickness
- 8-60 mm