SafanDarley Made in Netherlands
M-Shear 430-16
M-Shear
The M-Shear combines servo-electric motors with a hydraulic pump in a hybrid drive, which keeps it quiet and lowers energy use compared with a purely hydraulic shear. The control sets cutting angle and blade clearance automatically, corrects the knife-bar stroke when the angle changes, and allows programmable start and stop positions for shorter cuts. The 430-16 is the heaviest model, cutting 5/8 in mild steel over 169 in.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all shears or every SafanDarley machine we supply.
Specifications
- Cutting capacity, mild steel
- 5/8 in
- Cutting length
- 169 in (14 ft)
- Cutting angle
- 0.5-3°
- Strokes per minute (full / minimum cutting length)
- 8 / 26
- Main motor power
- 30 kW
- Backgauge reach / speed
- 49.2 in / 295 in/min
- Hold-down pads
- 26
- Machine weight
- 47,400 lb
- Control
- Touch screen on movable arm; CNC backgauge, clearance and cutting angle
- Blades
- 4 cutting edges
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The M-Shear 430-16 suits a shop wanting the quiet running and lower energy use of a hybrid servo-electric and hydraulic drive over a purely hydraulic shear, at 5/8 in mild steel capacity over 169 in, the heaviest model in SafanDarley's M-Shear line. Automatic cutting angle and blade clearance setting, plus stroke correction when the angle changes, reduce operator adjustment on jobs with varying thickness, and programmable start and stop positions speed up shorter cuts. A shop cutting thinner sheet at lower volume would find this heaviest M-Shear model, and its 47,400 lb weight, more than needed and should compare a lighter shear such as the Baykal HGL 2606.
Confirm before you order
- Confirm stainless steel capacity and controller model directly with SafanDarley, since neither is published
- Check floor load rating supports the 47,400 lb machine weight
- Verify backgauge reach (49.2 in) covers the part depths the shop typically cuts
Other shears
-
Baykal
HGL 2606
Compact 2.56 m hydraulic swing-beam shear for 6 mm mild steel.
- Capacity, mild steel (up to 450 N/mm2)
- 6 mm
- Capacity, stainless (up to 700 N/mm2)
- 4 mm
- Cutting length
- 2560 mm
-
Durma
VS 3013
3 m CNC variable-rake guillotine shear rated for 13 mm mild steel.
- Cutting length
- 3080 mm
- Capacity, mild steel (450 N/mm2)
- 13 mm
- Capacity, stainless (700 N/mm2)
- 10 mm
-
Ermaksan
CNC HVR 3100-10
3.1 m CNC hydraulic guillotine shear for 10 mm mild steel with automatic rake and blade-gap setting.
- Cutting length
- 3100 mm
- Capacity, mild steel (42 kg/mm2)
- 10 mm
- Capacity, stainless (70 kg/mm2)
- 6 mm