Mazak Made in Japan

FT-150 NEO

Name: Mazak FT-150 NEO
Brand: Mazak

FT-150 NEO

The FT-150 NEO moves its cutting head on a dedicated U axis, which lets it cut small contours in tube quickly and accurately. Tube is fed from a large-capacity bundle loader and finished parts are unloaded automatically, while the machine measures the actual OD and finds weld seams to keep features in the right place. An optional rotary tool unit adds drilling, tapping and chamfering so parts come off complete.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all tube lasers or every Mazak machine we supply.

Specifications

Max. round pipe diameter: 6 in
Max. square pipe size: 4.92 x 4.92 in
Max. workpiece length (loading): 255.91 in
Laser power: 3.0 kW
X-axis rapid: 5906 IPM
Y / Z / U-axis rapid: 2559 IPM
B / C axis speed: 19200 / 54000 deg/min
CNC: SmoothTUBE, dual 21.5 in touch panels
Loading: Large-capacity bundle loader, automatic unloading
Options: Rotary tool unit for drilling, tapping and chamfering

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The FT-150 NEO suits a shop cutting round pipe up to 6 in and square tube up to 4.92 in that wants automatic bundle loading and unloading to keep an operator from handling every piece by hand. A dedicated U axis for the cutting head speeds up small contour cuts in tube compared with a machine that moves the whole gantry for the same feature, and automatic OD measurement and weld-seam finding keep features positioned correctly despite normal tube variation. The optional rotary tool unit for drilling, tapping and chamfering suits a shop wanting finished parts off the machine rather than routing them to a second operation.

Confirm before you order

Confirm which spec table rows the manufacturer's option footnote applies to before finalizing the configuration
Check maximum workpiece length for loading (255.91 in) against the raw tube lengths the shop sources
Verify whether the rotary tool unit for drilling, tapping and chamfering is needed or a separate operation is acceptable