Lung Meng Made in Taiwan
TPA-800GP
Fully Automatic Servo-Driven T-Shirt Bag Making Machine (TPA-GP Series)
A servo-fed converter that seals and cuts T-shirt (vest) carrier bags from blown film. Film is unwound under tension through an edge-position controller, and bag length and printed-bag registration are set from the control panel. The sealing and cutting head can be turned over for cleaning, and a pneumatic loader handles mother-roll changes.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all plastic bag machines or every Lung Meng machine we supply.
Specifications
- Lanes
- 2
- Max production
- 300 cycles/min
- Max bag width
- 330 mm
- Bag length
- 350-700 mm
- Film thickness, HDPE
- 0.008-0.025 mm
- Film thickness, LDPE
- 0.020-0.060 mm
- Power required
- 21 kW
- Other series models
- TPA-500GP: 1 lane, 445 mm, 275 cycles/min, 11 kW; TPA-1000GP: 2 lanes, 420 mm, 250 cycles/min, 24 kW
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The TPA-800GP suits a mid-volume T-shirt carrier bag converter running two lanes at up to 300 cycles per minute, sitting between Lung Meng's smaller single-lane TPA-500GP and its wider TPA-1000GP in the same series. Bag width up to 330 mm covers standard grocery and retail carrier bag sizes, and edge-position control keeps printed bag registration accurate through the run. A converter needing wider bags up to 420 mm, at a lower per-lane speed, should compare the TPA-1000GP instead, while a smaller operation with lower volume needs might do better with the single-lane TPA-500GP.
Confirm before you order
- Confirm film thickness range for HDPE (0.008 to 0.025 mm) or LDPE (0.020 to 0.060 mm) matches the resin planned
- Check power requirement of 21 kW against available shop electrical service
- Verify weight, footprint and air supply directly with Lung Meng, since none are published on the product page
Other plastic bag machines
-
Chovyting
CW-1000PR+C2
Servo-driven bottom seal bag-on-roll machine that makes perforated bags on cored or coreless rolls with automatic roll change.
- Bag making speed
- 250 pcs/min
- Line speed
- 80 m/min (cored), 100 m/min (coreless)
- Unwind width
- 900 mm (single line), 300 mm x 2 (double line)
-
Hemingstone
HM-1000HSE-X
Flying-knife side seal bag machine that can also make bottom seal bags, running one wide film or two narrower printed films at up to 400 bags per minute in total.
- Max. speed (side seal)
- 60-200 pcs/min single line, 120-400 pcs/min total on 2 lines
- Max. speed (bottom seal)
- 20-100 pcs/min single line, 40-300 pcs/min total on 2 lines
- Side seal bag width
- 100-750 mm
-
Hemingstone
HM-1200V4A
Computer-controlled T-shirt (vest) bag machine that seals and punches bags on up to four lines at up to 250 cycles per minute.
- Max. speed
- 250 cycles/min (100 m/min per line)
- Max. output
- 1,000 pcs/min (4 lines, bag width under 250 mm)
- Bag width
- 150-250 mm x 4 lines, 150-500 mm x 2 lines