Hemingstone Made in Taiwan
HM-1200V4A
Fully Automatic T-shirt Bag Making Machines
The HM-1200V4A turns film into T-shirt bags on four lines at once when the bag is 250 mm wide or less, or on two lines for bags up to 500 mm wide. It runs from a colour touch panel that stops the machine and shows fault codes when something goes wrong, and uses blower-type tension control, four EPC edge guides and four independent punching knife modules. The upper sealing bar tilts up for maintenance, and a shifting device staggers the seal lines so stacked bags do not stick together.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all plastic bag machines or every Hemingstone machine we supply.
Specifications
- Max. speed
- 250 cycles/min (100 m/min per line)
- Max. output
- 1,000 pcs/min (4 lines, bag width under 250 mm)
- Bag width
- 150-250 mm x 4 lines, 150-500 mm x 2 lines
- Bag length
- 260-650 mm
- Film thickness
- 0.008-0.035 mm
- Heaters
- 7 kW
- Power required
- 11 kW
- Machine dimensions (L x W x H)
- 8.8 x 2.1 x 1.7 m
- Machine weight
- 3,300 kg (gross 3,800 kg)
- Air compressor
- 7.5 hp (not included)
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The HM-1200V4A suits a high-volume T-shirt bag producer wanting maximum output from one machine, since running four lines at once on bags 250 mm wide or less reaches up to 1,000 pieces per minute total, well above a single-line converter. Switching to two lines extends bag width to 500 mm, giving a shop flexibility between narrow high-speed runs and wider bags at lower output. Independent punching knife modules on each line and a shifting device that staggers seal lines matter for a shop running varied bag styles without bags sticking together. A smaller operation not needing four-line output would be better matched to a simpler single or two-lane machine.
Confirm before you order
- Confirm bag width and line count trade-off (four lines at 150 to 250 mm, or two lines at 150 to 500 mm) against actual order mix
- Check film thickness range (0.008 to 0.035 mm) matches the resin gauge planned
- Verify air compressor (7.5 hp) is budgeted separately, since it is not included with the machine
Other plastic bag machines
-
Chovyting
CW-1000PR+C2
Servo-driven bottom seal bag-on-roll machine that makes perforated bags on cored or coreless rolls with automatic roll change.
- Bag making speed
- 250 pcs/min
- Line speed
- 80 m/min (cored), 100 m/min (coreless)
- Unwind width
- 900 mm (single line), 300 mm x 2 (double line)
-
Hemingstone
HM-1000HSE-X
Flying-knife side seal bag machine that can also make bottom seal bags, running one wide film or two narrower printed films at up to 400 bags per minute in total.
- Max. speed (side seal)
- 60-200 pcs/min single line, 120-400 pcs/min total on 2 lines
- Max. speed (bottom seal)
- 20-100 pcs/min single line, 40-300 pcs/min total on 2 lines
- Side seal bag width
- 100-750 mm
-
Lung Meng
TA-S-750XL-2Q
Two-lane star seal garbage bag-on-roll line with servo-driven shuttle track sealing and perforation, running up to 130 m/min.
- Max. production speed
- 130 m/min
- Lanes
- 2
- Mother film width
- 100-300 mm x 2