Gweike Made in China
LF3015LN II
LN Series Single Platform Laser Cutting Machine
The LF3015LN II is the 3050 x 1520 mm size of Gweike's LN series, a single-table cutter without a pallet changer. The bed is built in modules, which makes shipping and later maintenance easier, and the gantry carries an aluminium beam. It targets thin and medium sheet work where a simple, lower-cost layout matters more than automatic table exchange.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all fiber lasers or every Gweike machine we supply.
Specifications
- Working area
- 3050 x 1520 mm
- Laser power options
- 1, 2, 3, 4, 6 or 12 kW
- X/Y positioning accuracy
- ±0.05 mm
- X/Y repeat positioning accuracy
- ±0.03 mm
- Max. acceleration
- 1.5 G
- Dry running speed
- 120 m/min
- Beam
- Aviation aluminium
- Power supply
- 380 V, 50/60 Hz
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The LF3015LN II suits a shop that wants a full 3 x 1.5 m fiber laser without paying for a pallet changer it may not need, since the single-table modular bed keeps cost and complexity down for thin to medium sheet work. Power options from 1 to 12 kW let a shop start lean and specify more power only if thicker plate is part of the job mix. Because there is no automatic table exchange, a shop that needs to load the next sheet while the current one finishes cutting, to keep the laser running during changeover, should compare the pallet-equipped LF3015GA instead.
Confirm before you order
- Confirm laser power needed for target material thickness, since no cutting chart is published
- Check loading and unloading workflow given the single fixed table with no pallet exchange
- Verify 380 V three-phase supply is available or budget for a transformer
Other fiber lasers
-
Amada
ENSIS-3015RIe
3 x 1.5 m fiber laser with a built-in Rotary Index that also cuts round, square and rectangular tube, channel and angle.
- Laser power
- 3000, 6000 or 9000 W (max. 3 kW in Rotary Index mode)
- Working range (X x Y x Z)
- 3070 x 1550 x 200 mm
- Repeatable positioning accuracy
- ±0.01 mm
-
Bystronic
ByStar Fiber 6225
Large-format 6.2 x 2.5 m enclosed fiber laser from Bystronic with laser sources up to 30 kW.
- Nominal sheet size
- 6200 x 2500 mm
- Laser power
- Up to 30 kW
- Max. simultaneous positioning speed
- 170 m/min
-
Gweike
LF1390
Fully enclosed 1300 x 900 mm fiber laser for small, precise parts in thin sheet, offered from 500 W to 3 kW.
- Working area
- 1300 x 900 mm
- Laser power
- 500 W, 800 W, 1000 W, 2000 W or 3000 W
- Repeat positioning accuracy
- ±0.02 mm