SafanDarley Made in Netherlands

H-iBrake 400T-4200

Name: SafanDarley H-iBrake 400T-4200
Brand: SafanDarley

H-iBrake 125-560T

The H-iBrake uses a hydraulic drive developed in-house by SafanDarley, with small oil volume and energy regeneration, driven here by two 15 kW motors. The 400T-4200 size gives 441 US tons over 167.3 in with a 14 in stroke and 27.6 in daylight. It runs on SafanDarley's E-Control touch-screen system, with integrated light-screen safety that can be programmed per bend.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all press brakes or every SafanDarley machine we supply.

Specifications

Pressing force: 441 US ton
Operational length: 167.3 in
Stroke: 14 in
Q-dimension (daylight): 27.6 in
Working height: 40.4 in
Speeds (approach / max. bending / return): 283 / 24 / 307 in/min
Motor power / connected load: 2 x 15 kW / 50 kW
Machine length x depth x height: 209 x 87 x 138 in
Weight: 59,525 lb
Noise level: < 70 dB

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The H-iBrake 400T-4200 suits a shop bending heavy plate and long parts that wants a hybrid hydraulic drive with lower oil volume and energy regeneration rather than a conventional full-hydraulic system, at 441 US tons over 167.3 in. Integrated light-screen safety programmable per bend matters for a shop running varied parts where guard settings would otherwise need manual adjustment between jobs. A shop that mainly bends lighter gauge sheet metal in high volume would find this scale of machine, and its associated cost, unnecessary and should look at a lower-tonnage model such as the Ermaksan Power-Bend Pro or Durma AD-R instead.

Confirm before you order

Confirm oil volume for this specific model, since SafanDarley publishes only a series-wide figure
Check connected load (50 kW) against available shop electrical service
Verify whether tandem operation is planned, since SafanDarley sells a separate H-Brake Tandem line for that