PMC (Paper Machinery Corporation) Made in USA
PL 300
PL 300 2-Piece Paper Lid Machine
The PL 300 builds a paperboard lid from a flat disk and a side-wall ring, then finishes the edge in push-incurl, crimp and finishing stations for a crimped, flat or rounded look. Each station has its own Bosch servo motor, and the machine can be blank-fed or roll-fed with offset or flexo printed board. It can also form a snap-and-lock bead inside the lid so it holds firmly on the matching container and stacks well.
Request a quote for this machineQuoted with delivery, installation and operator training.
Specifications
- Speed
- 110-170 lids/min (depends on lid size and caliper)
- Round lid diameter
- 2.5-6.5 in (63.5-165.1 mm), inside lower ring in-curl
- Non-round lid
- 4.4-7.3 in (112-185.4 mm), side wall strip max 20.5 in
- Max side wall ring length
- 20.5 in (520.7 mm)
- Min top depth
- 0.28 in (7 mm)
- Ring stock thickness
- 0.015-0.025 in standard cup stock
- Disk stock thickness
- 0.015-0.025 in standard cup stock
- Container size
- Cups and containers up to 48 oz
- Infeed
- Blank-fed or roll-fed
- Electrical
- 130 kVA
Manufacturer data. Options and exact configuration are confirmed in your quote.
Other paper cup machines
-
Mingguo
MG-HC800
Sleeve machine that adds an outer paper wall to formed cups to make insulated double-wall and corrugated hot-drink cups.
- Production capacity
- 90-120 pcs/min
- Cup size
- 4-16 oz (100-450 ml), mould exchangeable
- Top diameter
- 55-90 mm
-
PMC (Paper Machinery Corporation)
1003
High-volume two-piece cup and container former rated at up to 330 pieces per minute.
- Output
- Up to 330 cups/containers per minute
- Size range
- 3 oz (89 ml) to 32 oz (950 ml)
- Feed stock
- Pre-printed die-cut sidewall blanks + web-fed bottom stock
-
Ruida
RD-230A
Full-servo horizontal paper cup former rated around 230 cups per minute for 6-22 oz hot and cold drink cups.
- Speed
- 220-260 pcs/min
- Cup size
- 6-22 oz
- Top diameter
- 60-100 mm