LVD Made in Belgium

PPEB 640/61

Name: LVD PPEB 640/61
Brand: LVD

PPEB

The PPEB 640/61 is the largest standard PPEB, with 700 tons of force over a 240 in bed and a servo-hydraulic system built in-house by LVD. Linear encoders mounted to the bed read ram position independently of frame deflection, and the 500 and 640 ton models use a modular six-axis backgauge. LVD configures the PPEB with options such as extra daylight, wider tables, hydraulic clamping and tandem installation, and runs it from the 19 in Touch-B control.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all press brakes or every LVD machine we supply.

Specifications

Pressing force: 700 ton
Working length: 240 in
Distance between uprights: 198 in
Stroke / distance table-ram: 11.8 in / 22.4 in
Gap (throat): 15.7 in
Table width: 7.9 in
Speeds (approach / working / return): 212 / 21 / 236 in/min
Motor: 75 HP
Weight / oil tank: 125,685 lb / 225 gal
Control / backgauge: Touch-B 19 in touch screen; modular X1, R1, Z1 - X2, R2, Z2 backgauge

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The PPEB 640/61 suits a heavy plate fabricator needing the largest standard press brake in LVD's PPEB range, at 700 tons over a 240 in bed, where linear encoders mounted directly to the bed keep ram position accurate independent of frame deflection under heavy load. The modular six-axis backgauge and tandem installation option suit a shop running long structural parts that need two brakes working together. Because frames above 400 tons or 4 m may need modified floor arrangements per LVD's own literature, a shop should plan foundation work before ordering rather than treating installation as routine. A shop bending typical gauge sheet metal has no use for this scale.

Confirm before you order

Confirm foundation and floor requirements with LVD, since frames above 400 ton or 4 m may need modified floor arrangements
Check whether tandem installation is planned, since the brochure does not give tandem-specific figures
Verify oil tank capacity (225 gal) and motor (75 HP) match the duty cycle planned