Jota Made in China
JT-50D
JT-50D Paper Straw Making Machine With Online Cutter
The JT-50D winds one to three layers of paper into straws of 5-11 mm diameter and cuts them to length inline, so no second cutting step is needed. The servo cutter uses round knives for clean ends, and the machine includes a stainless steel glue box, a tension-controlled unwind stand and automatic lubrication. All settings are made on a PLC touch screen.
Request a quote for this machineQuoted with delivery, installation and operator training.
See all paper straw machines or every Jota machine we supply.
Specifications
- Winding speed
- 0-45 m/min (around 12,000 pcs/hour)
- Paper layers
- 1-3
- Straw diameter
- 5-11 mm
- Straw wall thickness
- 0.3-1 mm
- Cutting length
- 100-800 mm
- Winder heads / cutters
- 2 / 6 sets
- Power
- Main motor 3 kW, servo 1 kW, inverter 3.7 kW; 380 V 3-phase 50 Hz
- Compressed air
- 0.6 MPa
- Dimensions / workspace
- 5,600 x 1,600 x 1,750 mm / 11,000 x 6,000 x 2,000 mm
- Weight
- 1,500 kg
Manufacturer data. Options and exact configuration are confirmed in your quote.
Where it fits
The JT-50D suits a straw producer focused on small-diameter 5 to 11 mm straws, such as juice box or narrow beverage straws, where the two winding heads and six-knife servo cutter are sized for that narrower range rather than standard drink straws. Cutting straight to length inline at up to 45 m/min removes a separate cutting step, and the stainless steel glue box and automatic lubrication suit continuous production runs. A producer needing standard 8 to 12 mm drinking straws at higher volume would be better matched to the Gaoda GDM-30, which is built for that wider, higher-output range.
Confirm before you order
- Confirm cutting length range (100 to 800 mm) covers the straw lengths the shop plans to produce
- Check paper layer count (1 to 3) matches the wall strength needed for the straw diameter planned
- Verify power draw (main motor 3 kW plus servo and inverter) against available shop electrical service
