HSG Laser Made in China

TP65S

Name: HSG Laser TP65S
Brand: HSG Laser

TPS Series Tube Beveling Fiber Laser Cutting Machine

The TP65S cuts round, square and profiled tube, and its LA4 bevel head tilts from 0 to 45° so weld preparations are cut in the same pass. The chucks report clamping status and adjust clamping force automatically, and HSG's bus-based HSG-X control runs the machine. It loads single tubes of up to 200 kg.

Request a quote for this machine

Quoted with delivery, installation and operator training.

See all tube lasers or every HSG Laser machine we supply.

Specifications

Laser power: 3000-6000 W
Round tube capacity: Φ20-Φ273 mm
Square tube capacity: 20 x 20 - 200 x 200 mm
Max. single tube weight: 200 kg
X/Y positioning accuracy: ±0.03 mm/m
Bevel cutting: 0-45° (LA4 bevel head)
Control system: HSG-X bus control system

Manufacturer data. Options and exact configuration are confirmed in your quote.

Where it fits

The TP65S suits a fabricator that needs weld-prep bevels cut directly into tube, since the LA4 head tilts from 0 to 45 degrees in the same pass as the cut, avoiding a separate bevel-prep step before welding. Round tube up to 273 mm and square tube up to 200 mm cover common structural and mechanical tube sizes, and chucks that report clamping status and adjust force automatically reduce setup error. A shop that never needs bevel cuts, working only square cuts on tube, would not need this feature and could save with a simpler machine such as the Gweike GKS-6024T2.

Confirm before you order

Confirm positioning accuracy, weight and footprint directly with HSG, since the product page and PDF spec sheet are only partly readable
Check maximum single tube weight (200 kg) against the heaviest stock the shop plans to cut
Verify whether bevel cutting is actually needed for the shop's typical welded joints